[2018.12] HYUNDAI STEEL Incheon Medium Section Mill Cold Leveler Profile Measuring System completed

[2018.12] HYUNDAI STEEL Incheon Large Section Mill Profile Measuring System Tuning completed

[2018.12] HYUNDAI STEEL Incheon Medium Section Mill Profile Measuring System Upgrade completed

[2018.12] HYUNDAI STEEL Dangjin Plate Mill second half of 2018 Flatness Measurement System Precision Inspection & Tuning completed

[2018.12] Ulsan Aluminum Williamson Pyrometer APTQ supplied

[2018.12] HYUNDAI STEEL Dangjin 1 Hot Rolled Mill Width Measurement System Upgrade supplied

[2018.11] HYUNDAI STEEL Dangjin 1,2, thin plate Hot Rolled Mill Precision Inspection of Special Measuring System completed

[2018.10] SeAH FS Thailand Williamson Pyrometer supplied

[2018.09] POSCO Mexico Width Measurement System Tuning completed

[2018.08] Ulsan Aluminum HFM Temperature Measuring System Williamson Pyrometer supplied

[2018.08] HYUNDAI STEEL Dangjin 1 Plate Mill No.1 Press Leveler Flatness Measurement System Image Controller Upgrade supplied

[2018.08] Novelis Korea Youngju Aluminum Cold Rolled Mill CM On-Line Williamson Pyrometer supplied

[2018.08] DAE YEONG METAL Gyeongsan Aluminum Extrusion Williamson Pyrometer supplied

[2018.08] HYUNDAI STEEL Incheon Large Section Mill Profile Measuring System OVERHAUL completed

[2018.06] HYUNDAI STEEL Dangjin 2 Plate Mill CPL Flatness Measurement System Upgrade completed

[2018.06] HYUNDAI STEEL Dangjin Plate Mill first half of 2018 Flatness Measurement System Precision Inspection & Tuning completed

[2018.05] Sunjin AAT Haman Aluminum Extrusion Recorder & Thermal couple supplied

[2018.04] HYUNDAI STEEL Dangjin 1,2 Hot Rolled Mill Precision Inspection of Special Measuring System completed

[2018.04] POSCO Vietnam Welder Position Controller Tuning completed

[2018.04] HYUNDAI STEEL Dangjin 1 Plate Mill No.2 Press Leveler Flatness Measurement System Laser Module Replacement supplied & Supervising

[2018.04] HYUNDAI STEEL Dangjin 1 Plate Mill Off Line Flatness Measurement System Laser Module Replacement supplied & Supervising

[2018.04] HYUNDAI STEEL Dangjin 2 Plate Mill CPL Flatness Measurement System Laser Module Replacement supplied & Supervising

[2018.03] SeAH FS Pyeongtaek Williamson Pyrometer Interface Module & Cable supplied

[2018.03] JEONAN STEEL Daegu Williamson Pyrometer Interface Module supplied

[2017.12] Sunjin AAT Haman Aluminum Extrusion Williamson Pyrometer supplied

[2017.12] Hansung Aluminum Aluminum Extrusion Williamson Pyrometer supplied

[2017.12] DONGKUK Steel Dangjin Plate Mill Final Inspection Measuring System
(Plate Dimension Measurement System / Flatness Measurement System)
Upgrade completed

[2017.12] HYUNDAI STEEL Dangjin Plate Mill second half of 2017 Flatness Measurement
System Precision Inspection & Tuning completed

[2017.12] HYUNDAI STEEL Dangjin C Hot Rolled Mill after FM Williamson Pyrometer
supplied

[2017.11] HYUNDAI STEEL Dangjin B, C Hot Rolled Mill Precision Inspection of Special
Measuring System completed

[2017.11] HYUNDAI STEEL Dangjin A Hot Rolled Mill Precision Inspection of Special
Measuring System completed

[2017.10] LS Cable & System Gumi Aluminum Casting Williamson Pyrometer supplied

[2017.10] HYUNDAI STEEL Dangjin A Hot Rolled Mill No.1 SPM Width Measurement System Upgrade completed

[2017.09] HYUNDAI STEEL Dangjin C Hot Rolled Mill No.3&4 SPM Width Measurement
System Upgrade supplied & completed

[2017.07] DONGKUK Steel Pohang Profile Measuring System Tuning completed

[2017.07] HYUNDAI STEEL Incheon Large Section Mill Profile Measuring System Overhaul
completed

[2017.07] POSCO Pohang STS 3APL Width Measurement System completed

[2017.07] POSCO Gwangyang Plate Mill Williamson Pyrometer supplied

[2017.06] HYUNDAI STEEL Incheon Medium Section Profile Measuring System completed

[2017.05] POSCO Pohang No.2 Hot Rolled Mill Heating Furnace Width Measurement System
completed

[2017.05] HYUNDAI STEEL Dangjin Plate Mill first half of 2017 Flatness Measurement
System Precision Inspection & Tuning completed

[2017.04] HYUNDAI STEEL Dangjin B, C Hot Rolled Mill Precision Inspection of Special
Measuring System completed

[2017.03] HYUNDAI STEEL Dangjin No.5 SPM Width Measurement System Software
Development completed

[2017.01] HYUNDAI STEEL Incheon Large Section Mill Profile Measuring System Overhaul
completed

[2017.01] POSCO Gwangyang Plate Mill Williamson Pyrometer supplied

[2016.12] POSCO Pohang STS No.2 Cold Rolled Mill APF Width Gauge Upgrade completed

[2016.12] POSCO Pohang No.2 Cold Rolled PCM Width Gauge Upgrade completed

[2016.12] HYUNDAI STEEL Incheon Medium Section Mill Profile Measuring
System supplied

[2016.12] DONGKUK Steel Pohang Section Shape Profile Measuring System Replacement
of Laser completed

[2016.11] HYUNDAI STEEL Dangjin B,C Hot Rolled Mill Precision Inspection of Special
Measuring System completed

[2016.11] POSCO Pohang No.2 Hot Rolled Mill Heating Furnace Width
Measurement System contracted

[2016.11] POSCO Gwangyang Plate Mill Flatness Measurement System Smart Factory
Software Development completed

[2016.10] HYUNDAI STEEL Dangjin A Hot Rolled Mill SPM Precision Inspection of
Width Gauge completed

[2016.10] HYUNDAI STEEL Dangjin C Hot Rolled Mill Heating Furnace Slab
Width/Length/Camber Measurement System Upgrade supplied & completed

[2016.08] HYUNDAI STEEL Dangjin No.1 Plate Mill Cold Leveler Line Williamson Pyrometer
supplied

[2016.07] HYUNDAI STEEL Dangjin C Hot Rolled Mill No.2 SPM Width Gauge Upgrade
supplied & completed

[2016.06] HYUNDAI STEEL Dangjin C Hot Rolled Mill Down Coiler Williamson Pyrometer
supplied

[2016.06] HYUNDAI STEEL Incheon Large Section Mill Precision Inspection of Profile
Measuring System & Replacement of Laser completed

[2016.06] HYUNDAI STEEL Incheon Large Section Mill Profile Measuring System Upgrade
completed

[2016.05] HYUNDAI STEEL Dangjin No.1 Plate Mill Precision Inspection of Special
Measuring System completed

[2016.04] HYUNDAI STEEL Dangjin C Hot Rolled Mill No.1 SPM Width Gauge Upgrade
supplied & completed

[2016.04] HYUNDAI STEEL Dangjin B,C Hot Rolled Mill Precision Inspection of Special
Measuring System completed

[2016.02] POSCO Pohang No.2 Hot Rolled Mill Heating Furnace Williamson Pyrometer
supplied

[2016.02] HYUNDAI STEEL Dangjin No.1 Plate Mill Cold Leveler Flatness Measurement
System completed

[2015.12] HYUNDAI STEEL Dangjin No.2 Plate Mill Off Line Flatness Measurement
System completed

[2015.12] HYUNDAI STEEL Dangjin No.1 Plate Mill Off Line Flatness Measurement
System completed

[2015.12] HYUNDAI STEEL Dangjin C Hot Rolled Mill No.5 SPM Width Measurement
System completed

[2015.12] HYUNDAI STEEL Dangjin No.1 Plate Mill Cold Leveler Flatness
Measurement System supplied & installed

[2015.11] HYUNDAI STEEL Dangjin No.1 Plate Mill Cold Leveler Flatness
Measurement System supplied & installed

[2015.11] HYUNDAI STEEL Dangjin B Hot Rolled Mill Slab Width/Length/Camber
Measurement System Williamson Pyrometer supplied

[2015.11] HYUNDAI STEEL Dangjin No.1 Plate Mill Cold Leveler Line Williamson
Pyrometer supplied

[2015.10] DONGKUK Steel Pohang Section Shape Profile Measuring System
Replacement of Laser completed

[2015.10] HYUNDAI STEEL Dangjin No.2 Plate Mill Off Line Flatness Measurement
System supplied & installed

[2015.10] POSCO Vietnam TCM Width Measurement System Supervising completed

[2015.10] HYUNDAI STEEL Dangjin C Hot Rolled Mill Heating Furnace Williamson
Pyrometer supplied

[2015.10] DONGBU Incheon Steel CGL Williamson Pyrometer supplied

[2015.09] HYUNDAI STEEL Dangjin B,C Hot Rolled Mill Precision Inspection of Special
Measuring System completed

[2015.09] HYUNDAI STEEL Dangjin C Hot Rolled Mill No.5 SPM Width Measurement
System supplied

[2015.09] HYUNDAI STEEL Dangjin No.2 Plate Mill Off Line Flatness Measurement
System contracted

[2015.09] HYUNDAI STEEL Dangjin No.1 Plate Mill Off Line Flatness Measurement
System contracted

[2015.09] POSCO Gwangyang Plate Mill Inspection Line Plate Mill Plate Dimension
Measurement System (Width/ Length/ Camber/ Perpendicularity) Williamson
Pyrometer supplied

[2015.08] DONGKUK Steel Pohang Section Shape Profile Measuring SystemReplacement
of Laser contracted

[2015.08] HYUNDAI STEEL Dangjin B,C Hot Rolled Mill Precision Inspection ofSpecial
Measuring System contracted

[2015.07] POSCO Vietnam TCM Width Measurement System Supervising contracted

[2015.07] HYUNDAI STEEL Dangjin No.1 Plate Mill Cold Leveler FlatnessMeasurement
System contracted

[2015.07] DONGKUK Steel Dangjin Plate Mill Plate Dimension Measurement System
(Width/ Length/ Camber/ Perpendicularity) Replacement of Laser & Tuning

[2015.06] POSCO Pohang No.2 Hot Rolled Mill Heating Furnace Williamson
Pyrometer supplied

[2015.06] HYUNDAI STEEL Dangjin C Hot Rolled Mill Slab Width/Length/Camber
Measurement System Williamson Pyrometer supplied

[2015.05] POSCO POSCO Gwangyang No.2 CRM 2-1RCL Width Measurement
System completed

[2015.04] POSCO Pohang No.2 Plate Mill On-Line Flatness Measurement System
Replacement of Laser & Tuning

[2015.03] POSCO Gwangyang Plate Mill Inspection Line Flatness MeasurementSystem
Replacement of Laser & Tuning

[2015.03] POSCO POSCO Gwangyang No.2 CRM 2-1RCL Width Measurement
System supplied

[2015.03] HYUNDAI STEEL Incheon Large Section Mill Profile Measuring
System completed

[2015.03] HYUNDAI STEEL Dangjin No.1 Plate Mill #2 Curved Plate Leveler Flatness
Measurement System:KOJIMA/JAPAN completed

[2014.12] HYUNDAI STEEL Dangjin No.1 Plate Mil #2 Curved Plate
Leveler Flatness Gauge:KOJIMA/JAPAN supplied

[2014.12] HYUNDAI STEEL Dangjin C Hot Rolled Mill No.5 SPM Width Gauge contracted

[2014.12] POSCO Pohang No.1 CRM(1CAL / 2CAL / 2CPL) Pin Hole Detector completed

[2014.12] DONGKUK Steel Pohang No.2 Plate Mill RM Width Gauge completed

[2014.11] POSCO Pohang No.1 CRM(1CAL / 2CAL / 2CPL) Pin Hole Detector
supplied & installed

[2014.11] POSCO Gwangyang No.2 CRM 2-1RCL Width Gauge contracted

[2014.10] DONGKUK Steel Pohang No.2 Plate Mill RM Width Gauge supplied & installed

[2014.10] HYUNDAI STEEL Dangjin B,C Hot Rolled Mill Precision Inspection of Special
Measuring System Completed

[2014.08] ] HYUNDAI STEEL Incheon Large Section Mill Profile Measuring System
Supplied & Supervising

[2014.08] HYUNDAI STEEL Dangjin B,C Hot Rolled Mill Precision Inspection of Special
Measuring System contracted

[2014.08] DONGKUK Steel Pohang Section Shape Profile Measuring System
Temperature monitoring & Overhaul completed

[2014.06] DONGKUK Steel Pohang Section Shape Profile Measuring System
Replacement of Laser completed

[2014.06] DONGKUK Steel Dangjin Plate Mill Flatness Gauge Replacement of
Laser completed

[2014.06] HYUNDAI STEEL Dangjin No.1 Plate Mil #2 Curved Plate Leveler Flatness
Gauge:KOJIMA/JAPAN contracted

[2014.05] POSCO Gwangyang Plate Mill Inspection Line Flatness Gauge Auto
Calibrator supplied & installed

[2014.04] DONGKUK Steel Pohang, Dangjin Presentation of Williamson Pyrometer

[2014.04] DONGKUK Steel Pohang No.2 Plate Mill Flatness Gauge Auto
Calibrator installed completed

[2014.04] DONGKUK Steel Pohang No.2 Plate Mill Optic Measuring System
Replacement of Laser & Overhaul & Calibration completed

[2014.03] DONGKUK Steel Pohang No.2 Plate Mill Cold Leveler Flatness Gauge
Auto Calibrator Supplied & Installed

[2014.02] DONGKUK Steel Dangjin Plate Mill Flatness Gauge Replacement of
Laser contracted

[2014.02] DONGKUK Steel Pohang No.2 Plate Mill Flatness Gauge Auto
Calibrator installed contracted

[2014.02] DONGKUK Steel Pohang No.2 Plate Mill Optic Measuring System
Replacement of Laser & Overhaul & Calibration contracted

[2014.01] POSCO Pohang No.1 CRM 1CAL / 2CAL / 2CPL Pin Hole Detector Contracted

[2014.01] HYUNDAI STEEL Dangjin A Hot Rolled Mill SPM Width Gauge Supervising

[2013.12] DONGKUK Steel Pohang Section Shape Profile Measuring
System Williamson Pyrometer supplied

[2013.12] Plate POSCO Gwangyang Plate Mill Heating Furnace
Williamson Pyrometer supplied

[2013.12] HYUNDAI STEEL Incheon Large Section Mill Profile Measuring
System contracted

[2013.12] HYUNDAI STEEL Dangjin A Hot Rolled Mill SPM Width Gauge supplied

[2013.11] HYUNDAI STEEL Dangjin C Hot Rolled Mill carried out Optic Measuring
System Training

[2013.11] HYUNDAI STEEL Dangjin C Hot Rolled Mill Precision Inspection of
Special Measuring System completed

[2013.10] DONGKUK Steel Pohang No.2 Plate Mill RM Width Gauge contracted

[2013.09] HYUNDAI STEEL Dangjin C Hot Rolled Mill Precision Inspection of
Special Measuring System contracted

[2013.08] DONGKUK Steel Dangjin Plate Mill Plate Dimension Measurement System
(Width/ Length/ Camber/ Perpendicularity) Replacement of Laser completed

[2013.07] HYUNDAI STEEL Dangjin A / C Hot Rolled Mill carried out Optic
Measuring System Training

[2013.06] DONGKUK Steel Pohang Section Shape Profile Measuring System completed

[2013.05] HYUNDAI STEEL Dangjin A Hot Rolled Mill SPM Width Gauge contracted

[2013.04] POSCO Mexico RCL Width Gauge completed

[2013.03] HYUNDAI STEEL Dangjin C Hot Rolled Mill Precision Inspection of Special
Measuring System contracted & completed

[2013.03] POSCO Gwangyang Plate Mill T2 Flatness Gauge Auto Calibrator
supplied & installed

[2013.02] DONGKUK Steel Pohang No.2 Plate Mill Optic Measuring System
Laser & Overhaul completed

[2012.12] POSCO MEXICO RCL Width Gauge supplied

[2012.12] POSCO Gwangyang Plate Mill Flatness Gauge Auto Calibrator contracted

[2012.12] DONGKUK Steel Pohang No.2 Plate Mill Plate Dimension Measurement
System (Width/Length/ Camber/ Perpendicularity)/ Flatness Gauge
Replacement of Laser & Overhaul completed

[2012.11] HYUNDAI STEEL Dangjin C Hot Rolled Mill carried out Optic Measuring
System Training

[2012.10] DONGKUK Steel Pohang No.2 Plate Mill Re-correction Cold Leveler
Flatness Gauge Auto Calibrator supplied

[2012.10] DONGKUK Steel Pohang No.2 Plate Mill Plate Dimension Measurement
System (Width/Length/ Camber/Perpendicularity)/ Flatness Gauge/
Slab Width & Length Gauge Replacement of Laser & Overhaul contracted

[2012.08] POSCO Pohang STS No.2 CRM APF Width Gauge completed

[2012.08] HYUNDAI STEEL Dangjin Plate Mill Press Leveler Flatness Gauge completed

[2012.08] POSCO Pohang No.1 PM Length Extension Work of Plate Dimension
Measurement System(Width/Length/Camber/Perpendicularity)
contracted & completed

[2012.07] POSCO MEXICO RCL Width Gauge contracted

[2012.07] HYUNDAI STEEL Dangjin C Hot Rolled Mill carried out Optic Measuring
System Training

[2012.07] HYUNDAI STEEL Dangjin C Hot Rolled Mill periodical precision inspection
of Special Measuring System contracted & completed

[2012.06] POSCO Pohang STS No.2CRM APF Width Gauge supplied & installed

[2012.06] DONGKUK Steel Pohang No.2 Plate Mill Re-correction Plate Dimension
Measurement System(Width/Length/Camber/Perpendicularity) contracted

[2012.05] DONGKUK Steel Dangjin Plate Mill Plate Dimension Measurement
System & Flatness Gauge Overhaul completed

[2012.04] DONGKUK Steel Pohang No.2 Plate Mill Re-correction Plate Dimension
Measurement System(Width/Length/Camber/Perpendicularity) supplied

[2012.04] HYUNDAI STEEL Dangjin Plate Mill Press Leveler Flatness Gauge supplied

[2012.04] HYUNDAI STEEL Dangjin C Hot Rolled Mill No.3&4 SPM Width Gauge completed

[2012.03] DONGKUK Steel Pohang No.2 Plate Mill Re-correction Cold Leveler
Flatness Gauge completed

[2012.03] DONGKUK Steel Dangjin Plate Mill Plate Dimension Measurement
System & Flatness Gauge Overhaul contracted

[2012.02] DONGKUK Steel Pohang No.2 Plate Mill Re-correction Cold Leveler
Flatness Gauge supplied & installed

[2012.02] POSCO Pohang STS No.2CRM APF Width Gauge contracted

[2011.12] HYUNDAI STEEL Dangjin C Hot Rolled Mill No.4 SPM Width Gauge supplied

[2011.12] POSCO Guangdong CGL Williamson Pyrometer supplied

[2011.12] POSCO Pohang Width Gauge & Shape Meter SW Development for quality infra establishment lengthwise completed

[2011.11] POSCO Pohang Electrical Mill 1&2 DRL Width Gauge completed

[2011.11] DONGKUK Steel Pohang No.2 Plate Mill Optic Measuring System
Overhaul completed

[2011.11] DONGKUK Steel Pohang No.2 Plate Mill Re-correction Press Leveler
Flatness Gauge completed

[2011.11] DONGKUK Steel Pohang Section Shape Profile Measuring System
supplied & installed

[2011.11] HYUNDAI STEEL Dangjin A Hot Rolled Mill SPM Width Gauge Rolling Data
Display completed

[2011.11] Flatness Gauge Auto Calibration System developed

[2011.11] Backlight (LED Projection) Type Width Gauge developed

[2011.10] POSCO Pohang Plate Mill Plate Dimension Measurement System&SW Development for quality infra establishment lengthwise completed

[2011.10] POSCO Electrical Mill 1DRL Width Gauge supplied & installed

[2011.10] DONGKUK Steel Pohang No.2 Plate Mill Re-correction Press Leveler
Flatness Gauge supplied & installed

[2011.09] POSCO Pohang Plate Mill Plate Dimension Measurement System &
SW Development for quality infra establishment lengthwise contracted

[2011.09] HYUNDAI STEEL Dangjin A Hot Rolled Mill SPM Width Gauge Rolling
Data Display contracted

[2011.09] POSCO Guangdong CGL Williamson Pyrometer contracted

[2011.09] HYUNDAI STEEL Dangjin C Hot Rolled Mill No.3 SPM Width Gauge supplied

[2011.09] POSCO Electrical Mill 2DRL Width Gauge supplied & installed

[2011.09] PALMATECH/ Marubeni Protechs Corporation (JAPAN)
Mutual Business Agreement sign

[2011.08] HYUNDAI STEEL Dangjin Plate Mill Press Leveler Flatness Gauge contracted

[2011.08] HYUNDAI STEEL Dangjin A Hot Rolled Mill SPM Width Gauge Relocation&
of Equipment Panel & System Tuning Supervising completed

[2011.08] DONGKUK Steel No.2 Plate Mill Optic Measuring System Overhaul contracted

[2011.08] POSCO Electrical Mill 2DRL Width Gauge Construction Part Supplied & Installed

[2011.07] DONGKUK Steel Pohang No.1 Plate Mill Width & Length Gauge completed

[2011.07] DONGKUK Steel Pohang No.2 Plate Mill Optic Equipment Cooling
System reconstruction completed

[2011.06] POSCO Pohang No.2 Electrical Mill No.1&2 DRL Width Gauge contracted

[2011.06] DONGKUK Steel Pohang No.2 Plate Mill Re-correction
Plate Dimension Measurement System
(Width/Length/Camber/Perpendicularity) contracted

[2011.06] DONGKUK Steel Pohang No.2 Plate Mill Optic Equipment Cooling System
reconstruction contracted

[2011.05] DONGKUK Steel Pohang No.1 Plate Mill Width & Length Gauge supplied

[2011.05] HYUNDAI STEEL Dangjin C Hot Rolled Mill No.3&4 SPM Width Gauge contracted

[2011.04] POSCO Pohang Width Gauge & Shape Meter SW Development for quality infra
establishment lengthwise contracted

[2011.04] DONGKUK Steel Pohang No.1 Plate Mill Width & Length Gauge contracted

[2011.04] DONGKUK Steel Dangjin Plate Mill No. 1 Flatness Gauge Relocation of
Equipment/Plate Dimension Measurement System
HMI Separation/Measuring System Overhaul supervising & completed

[2011.03] POSCO Gwangyang Plate Mill Heating Furnace Williamson Pyrometer
supplied

[2011.02] DONGKUK Steel Dangjin Plate Mill No. 1 Flatness Gauge Relocation of
Equipment/Plate Dimension Measurement
System HMI Separation/Measuring System Overhaul contracted

[2011.01] POSCO Gwangyang Plate Mill Heating Furnace Williamson Pyrometer
contracted

[2010.12] HYUNDAI STEEL Dangjin B Hot Rolled Mill SPM Width Gauge
Display Upgrade Supervising completed

[2010.11] HYUNDAI STEEL Dangjin B Hot Rolled Mill SPM Width Gauge
Display Upgrade contracted

[2010.11] DONGKUK Steel Pohang Profile Measuring System contracted

[2010.10] POSCO Gwangyang Cold Rolled Mill 2TCM Width Gauge Air Purge System
Supervising completed

[2010.10] POSCO Gwangyang Plate Mill Width Gauge Calibration Tool Set
(PMT-WG-CBT-A) supplied

[2010.10] HYUNDAI STEEL Dangjin C Hot Rolled Mill HDL Width Gauge Supervising(PAT)
completed

[2010.09] DONGKUK STEEL Pohang Plate Mill Cold Leveler Flatness Gauge contracted

[2010.09] DONGKUK STEEL Pohang Plate Mill Press Leveler Flatness Gauge contracted

[2010.09] POSCO Gwangyang Cold Rolled Mill 2TCM Width Gauge Air Purge System
(PMT-APS-C/L) 4EA supplied

[2010.09] POSCO Gwangyang Plate Mill Plate Dimension Measurement System
(Width/Length/Camber/Perpendicularity) Supervising completed

[2010.09] POSCO Gwangyang Plate Mill Plate Flatness Gauge 2set Supervising
completed

[2010.09] POSCO Gwangyang Plate Mill Plate Slab Width & Length Gauge Supervising
completed

[2010.09] HYUNDAI STEEL Dangjin C Hot Rolled Mill HDL Width Gauge Supervising
completed

[2010.08] HYUNDAI STEEL Dangjin A Hot Rolled Mill Width Gauge supplied & Supervising
completed

[2010.08] HYUNDAI STEEL C Hot Rolled Mill Slab Width & Length & Camber Gauge
Supervising(PAT) completed

[2010.08] HYUNDAI STEEL C Hot Rolled Mill HSL Width Gauge Supervising(PAT)
completed

[2010.08] HYUNDAI STEEL C Hot Rolled Mill HDL Width Gauge Supervising completed

[2010.07] POSCO Gwangyang Plate Mill Plate Dimension Measurement System
(Width/Length/Camber/Perpendicularity) Supervising(PAT) completed

[2010.07] POSCO Gwangyang Plate Mill Flatness Gauge 2set Supervising(PAT)
completed

[2010.07] DONGKUK STEEL Dangjin Plate Mill Plate Dimension Measurement System
& Flatness Gauge Spare supplied

[2010.07] HYUNDAI STEEL Dangjin C Hot Rolled Mill Slab Width & Length
& Camber Gauge supplied & Supervising completed

[2010.06] HYUNDAI STEEL Dangjin B Hot Rolled Mill Slab Width & Length
& Camber Gauge Supervising(FAT) completed

[2010.06] POSCO Gwangyang Plate Mill Slab Width & Length Gauge Supervising(PAT)
completed

[2010.06] POSCO Gwangyang Plate Mill Plate Dimension Measurement System
(Width/Length/Camber/Perpendicularity) Supervising completed

[2010.06] POSCO Gwangyang Plate Mill Flatness Gauge 2set Supervising completed

[2010.06] DONGKUK STEEL Pohang Plate Mill Gauge Overhaul & Calibration completed

[2010.06] DONGKUK STEEL Pohang 2 Plate Mill Williamson Pyrometer Spare
1Set supplied

[2010.05] HYUNDAI STEEL Dangjin B Hot Rolled Mill Slab Width & Length
& Camber Measurement System Supplied & Supervising completed

[2010.05] POSCO Pohang 2Cold Rolled Mill 3HSL Width Gauge System Upgrade
completed

[2010.05] DONGKUK STEEL Dangjin Plate Mill Gauge Spare Part contracted

[2010.05] DONGKUK STEEL Pohang Plate Mill Gauge Overhaul & Calibration contracted

[2010.05] Section Shape Profile Gauge Development & Demonstration completed

[2010.05] DONGKUK STEEL Dangjin Plate Mill.NO.3 Flatness Gauge Supervising (FAT)
completed

[2010.05] POSCO Gwangyang Plate Mill Plate Dimension Measurement System
(Width/Length/Camber/Perpendicularity) Supervising completed

[2010.05] POSCO Gwangyang Plate Mill Flatness Gauge 2set Supervising completed

[2010.04] DONGKUK STEEL Pohang Plate Mill NO.3 Horizontal Position Measuring
System Contract & Supervising completed

[2010.04] HYUNDAI STEEL Dangjin A Hot Rolled Mill SPM Width Gauge contract

[2010.04] DONGKUK STEEL Pohang Plate Mill Spare Pyrometer contract

[2010.04] POSCO Gwangyang Plate Mill Slab Width & Length Gauge Supervising (PAT)
completed

[2010.04] DONGKUK STEEL Pohang Williamson Pyrometer Technical Seminar completed

[2010.03] DONGKUK STEEL Pohang 2 Plate Mill Plate Dimension Measurement System
/ Flatness Gauge / Slab Width & Length Gauge Spare supplied

[2010.03] HYUNDAI STEEL Dangjin B Hot Rolled Mill New Plan SPM Width Gauge
Supervising(FAT) completed

[2010.03] POSCO Gwangyang Plate Mill Slab Width & Length Gauge Supervising
completed

[2010.02] HYUNDAI STEEL Dangjin C Hot Rolled Mill SLAB Width & Length
& Camber Measurement System supplied

[2010.02] HYUNDAI STEEL Dangjin C Hot Rolled Mill HSL & HDL Width Gauge
2set supplied

[2010.02] DONGKUK STEEL Dangjin Plate Mill Original SLAB Entry Weigher Width
& Length Measurement System Supervising(FAT) completed

[2010.02] DONGKUK STEEL Dangjin Plate Mill NO.1 PlateDimension Measurement
System(Width/Length/Camber/Perpendicularity) Supervising(FAT) completed

[2010.02] DONGKUK STEEL Dangjin Plate Mill NO.2 Plate Dimension Measurement
System (Width/Length/Camber/Perpendicularity) Supervising(FAT) completed

[2010.02] DONGKUK STEEL Dangjin Plate Mill NO.1 On-Line Flatness Gauge
Supervising(FAT) completed

[2010.02] DONGKUK STEEL Dangjin Plate Mill NO.2 On-Line Flatness Gauge
Supervising(FAT) completed

[2010.01] POSCO Gwangyang Plate Mill Plate Dimension Measurement System
(Width/Length/Camber/Perpendicularity) supplied

[2010.01] POSCO Gwangyang Plate Mill Plate Flatness Gauge 2set supplied

[2010.01] HYUNDAI STEEL Dangjin B Hot Rolled Mill New Plan SPM Width Gauge
Supervising completed

[2010.01] ISO 9001 certification Acquired

[2010.01] Building dedication ceremony completed

[2009.12] HYUNDAI STEEL Dangjin B Hot Rolled Mill New Plan SPM Width Gauge supplied

[2009.12] POSCO Pohang Electrical Steel Mill NO.2 HCL Edge Flare Measurement
System supplied .& Supervising completed

[2009.12] POSCO Gwangyang CGL Williamson Pyrometer 1 set supplied

[2009.12] POSCO Pohang Hot Rolled Mill 2HSL Width Gauge Upgrade completed

[2009.12] HYSCO Suncheon CGL Width Gauge upgrade contacted/completed

[2009.11] POSCO Pohang Electrical Steel Mill 2HCL Edge Flare Measurement
System contracted

[2009.11] POSCO Gwangyang CGL Wiliamson Pyrometer 1set contracted

[2009.11] ZHANGJIAGANG POHANG STAINLESS STEEL Width Gauge Technical
Presentation & Meeting completed

[2009.11] DONGKUK STEEL Dangjin Plate Mill NO.3 Flatness Gauge
Supervising (PAT) completed

[2009.11] DONGKUK STEEL Dangjin Plate Mill Slab Width & Length Measurement
System Supervising (PAT) completed

[2009.10] POSCO Pohang 2 Hot Rolled Mill 2HSL Width Gauge Upgrade contracted

[2009.10] DONGKUK STEEL Dangjin Plate Mill Plate Dimension Measurement
System / Flatness Gauge Spare supplied

[2009.10] POSCO Pohang Laser Module(Green/Red Laser Module) Spare

[2009.10] HYUNDAI STEEL Dangjin Laser Module(Red Laser Module) Spare
contracted/supplied

[2009.10] JEONAN HI-TUBE Williamson Pyrometer 1set supplied

[2009.10] POSCO Gwangyang Plate Mill Williamson Pyrometer 4set supplied

[2009.10] HYSCO Suncheon CGL/CAL Pin Hole Detector System Upgrade supplied

[2009.10] DONGKUK STEEL Dangjin Plate Mill NO.1 Plate Dimension
Measurement System (Width/Length/Camber/Perpendicularity) Supervising
(PAT) completed

[2009.10] DONGKUK STEEL Dangjin Plate Mill NO.2 Plate Dimension Measurement
System (Width/Length/Camber/Perpendicularity) Supervising(PAT) completed

[2009.10] DONGKUK STEEL Dangjin Plate Mill NO.1 On-Line Flatness Gauge
Supervising (PAT) completed

[2009.10] DONGKUK STEEL Dangjin Plate Mill NO.3 Flatness Gauge Supervising
(PAT) completed

[2009.10] DONGKUK STEEL Dangjin Plate Mill Original Plate Slab Width & Length
Measurement System Supervising completed

[2009.10] DONGKUK STEEL Dangjin Plate Mill NO.3 One Press Leveler Flatness
Gauge Supervising completed

[2009.09] HYUNDAI STEEL Dangin Dangjin C Hot Rolled Mill Width Gauge 2set
contracted

[2009.09] DONGKUK STEEL Dangin Plate Mill Plate Dimension Measurement System
/ Flatness Gauge spare contracted

[2009.09] POSCO Gwangyang Plate Mill Slab Width & Length Gauge supplied

[2009.09] POSCO Gwangyang CGL Williamson Pyrometer 1setsupplied

[2009.09] HYSCO Suncheon Pin Hole Detector Spare supplied

[2009.09] POSCO Pohang No.2 Plate Mill Slab Width & Length Gauge Auto
Calibrator supplied

[2009.09] DONGKUK STEEL Pohang No.2 Plate Mill Flatness Gauge Auto Calibrator
supplied

[2009.09] DONGKUK STEEL Dangjin Plate Mill Original Plate Slab Width & Length
Measurement System Supervising completed

[2009.09] POSCO VIETNAM PL/TCM Width Gauge Supervising (Final) for PAT
completed

[2009.09] POSCO VIETNAM CAL Width Gauge Supervising (Final) for PAT
completed

[2009.09] POSCO VIETNAM PL Welder Position Control System Supervising ( 2nd )
for fine tuning completed

[2009.08] HYUNDAI STEEL Dangin C Hot Rolled Mill SLAB Width & Length &
Camber Measurement System contracted

[2009.08] POSCO Gwangyang CGL Williamson Pyrometer 1Set contracted

[2009.08] HYSCO Dangin Cold Rolled Mill PL/TCM Width Gauge Up-Down Type
Upgrade completed

[2009.08] DONGKUK STEEL Dangin Plate Mill NO.1 Plate Dimension Measurement
System (Width/Length/Camber/Perpendicularity) Supervising completed

[2009.08] DONGKUK STEEL Dangin Plate Mill NO.1 On-Line Flatness Gauge
Supervising completed

[2009.08] DONGKUK STEEL Dangin Plate Mill NO.2 Plate Dimension Measurement
System (Width/Length/Camber/Perpendicularity) Supervising completed

[2009.08] DONGKUK STEEL Dangin Plate Mill NO.2 Plate Dimension Measurement
System (Width/Length/Camber/Perpendicularity) Supervising completed

[2009.08] DONGKUK STEEL Dangin Plate Mill NO.2 On-Line Flatness Gauge
Supervising completed

[2009.08] POSCO VIETNAM PL Welder Position Control System Supervising
completed

[2009.07] POSCO VIETNAM PL/TCM Width Gauge Supervising (3rd) for trial run &
education completed

[2009.07] JEONGAN HI-TUBE Williamson Pyrometer 1set contracted

[2009.06] POSCO Pohang 1 Cold Rolled Mill 2RCL r-ray Thickness Gauge supplied

[2009.06] DONGKUK STEEL Dangjin Plate Mill Press Leveler Flatness Gauge
Measurement System Supplied

[2009.06] DONGKUK STEEL Dangjin Plate Mill Entry Weigher Slab Width & Length
Measurement System Supplied

[2009.06] Venture Company Confirmation (Technical Company Confirmation)

[2009.06] ISO 9001 Education Completed

[2009.05] DONGKUK STEEL Dangjin Plate Mill NO.1 Plate Dimension Measurement
System (Width / Length / Camber / Perpendicularity) supplied

[2009.05] DONGKUK STEEL Dangjin Plate Mill NO.1 On-Line Flatness Gauge
supplied

[2009.05] DONGKUK STEEL Dangjin Plate Mill NO.2 Plate Dimension Measurement
System (Width / Length / Camber / Perpendicularity) supplied

[2009.05] DONGKUK STEEL Dangjin Plate Mill NO.2 On-Line Flatness Gauge
supplied

[2009.05] POSCO VIETNAM CAL Width Gauge Supervising (1st) for installation &
trial run completed

[2009.05] POSCO VIETNAM PL/TCM Width Gauge Supervising (2nd) for installation
& trial run completed

[2009.05] POSCO MEXICO CGL Width Gauge Supervising (Final) for trial run &
education completed

[2009.04] DONGKUK STEEL Pohang 2Plate Mill NO.1 Plate Dimension Measurement
System (Width / Length / Camber / Perpendicularity) completed

[2009.04] DONGKUK STEEL Pohang 2 Plate Mill NO.1 On-Line Flatness Gauge
completed

[2009.04] DONGKUK STEEL Pohang 2 Plate Mill NO.2 Plate Dimension
Measurement System (Width / Length / Camber / Perpendicularity)
completed

[2009.04] POSCO Gwangyang 2PCM Side Trimmer Width Gauge 2set completed

[2009.04] DONGKUK STEEL Dangjin / Pohang Optical Measuring Equipment
Education(Plate Dimension Measurement System / Flatness Gauge / Slab
Width & Length Gauge)

[2009.02] POSCO Gwangyang No.4 Plate Mill Flatness Gauge 2Set contracted

[2009.02] POSCO Gwangyang No.4 Plate Mill Measurement System (Width / Length /
Camber / Perpendicularity) 1Set contracted

[2009.02] POSCO Pohang 1Cold Rolled Mill 2RCL r-ray Thickness Gauge contracted

[2009.02] POSCO VIETNAM PL/TCM Width Gauge Supervising for Installation

[2009.02] POSCO MEXICO CGL Width Gauge Supervising for Installation & trial run

[2009.01] POSCO Pohang Electrical Steel Mill 3HCL Shape Meter supplied

[2009.01] POSCO VIETNAM PL/TCM Width Gauge 2set supplied

[2009.01] POSCO Pohang 2Cold Rolled Mill CSL Width & Shape Measurement
System completed

[2009.01] POSCO Pohang 1Cold Rolled Mill CSL Width & Shape Measurement
System completed

[2009.01] POSCO Pohang 2Cold Rolled Mill TCM Width Gauge completed

[2009.01] POSCO Pohang 2Hot Rolled Mill 3HSL Width Gauge completed

[2009.01] POSCO Pohang Electrical Steel Mill 1HCL Width Gauge completed

[2008.12] POSCO Gwangyang 1CRM 1CAL Welder Position Control System supplied

[2008.12] POSCO Gwangyang 3,4TCM Width Gauge 2set completed

[2008.11] POSCO Pohang Electrical Steel Mill 2DRL Pin-Hole Detector supplied

[2008.11] POSCO Pohang Electrical Steel Mill 3APL Width Gauge supplied

[2008.11] POSCO Pohang Electrical Steel Mill 3HCL Pin-Hole Detector supplied

[2008.11] POSCO Pohang Electrical Steel Mill 3HCL Width Gauge supplied

[2008.11] POSCO Pohang No.2 Plate Mill On-Line Flatness Gauge completed

[2008.11] POSCO Gwangyang No.4 Plate Mill Slab Width & Length Gauge contracted

[2008.11] DONGKUK STEEL Dangjin Original Slab Width & Length Gauge contracted

[2008.11] DONGKUK STEEL Pohang 2 Plate Mill NO.1 On-Line Flatness Gauge supplied

[2008.11] DONGKUK STEEL Pohang 2 Plate Mill NO.1 Plate Dimension Measurement
System (Width / Length / Camber / Perpendicularity) supplied

[2008.11] DONGKUK STEEL Pohang 2 Plate Mill NO.2 On-Line Flatness Gauge supplied

[2008.11] DONGKUK STEEL Pohang 2 Plate Mill NO.2 Plate Dimension Measurement
System (Width / Length / Camber / Perpendicularity) supplied

[2008.10] HYUNDAI STEEL Dangjin B Hot Rolled Mill New Plan SPM Width Gauge
contracted

[2008.10] POSCO Pohang Electrical Steel Mill NO.2 APL Width Gauge supplied

[2008.10] POSCO Mexico Width Gauge Spare Parts supplied

[2008.10] POSCO Pohang 2Cold Rolled Mill CSL Width & Shape Measurement
System supplied

[2008.10] POSCO Pohang 2Hot Rolled Mill 3HSL Width Gauge supplied

[2008.10] POSCO Pohang 2Cold Rolled Mill TCM Width Gauge supplied

[2008.10] POSCO Pohang 2Cold Rolled Mill CSL Pin-Hole Detector supplied

[2008.10] POSCO Pohang 1Cold Rolled Mill 1CAL Pin-Hole Detector supplied

[2008.10] POSCO Pohang 1Cold Rolled Mill 1CAL Shape Meter supplied

[2008.10] POSCO Pohang NO.2 Plate Mill inspection line On-Line Flatness Gauge
supplied

[2008.09] POSCO Vietnam PL/TCM Width Gauge 2set contracted

[2008.09] POSCO Pohang 1 Cold Rolled Mill CPL Width & Shape Measurement
System supplied

[2008.09] POSCO Gwangyang 2PCM Side Trimmer Width Gauge 2set supplied

[2008.09] POSCO Pohang STS APF Width Gauge supplied

[2008.09] POSCO Pohang NO.2 Plate Mill Slab Shape (Width & Length Profile)
Measurement System completed

[2008.09] POSCO Pohang NO.3 Plate Mill Slab Shape (Width & Length Profile)
Measurement System completed

[2008.08] POSCO Pohang 2 Plate Mill Heavy Plate Dimension Measurement System
(Width / Length / Camber / Perpendicularity) supplied

[2008.08] DONGKUK STEEL Pohang 2 Plate Mill Flatness Gauge 2set contracted

[2008.08] DONGKUK STEEL Pohang 2 Plate Mill Plate Dimension Measurement Syste
m (Width / Length / Camber / Perpendicularity) 2set contracted

[2008.08] POSCO Pohang No.3 Blast Furnace Williamson Pyrometer 3set supplied

[2008.07] POSCO Vietnam Cold Rolled Mill CAL Width Gauge 2set supplied

[2008.07] POSCO Pohang No.2 EGL Width Gauge supplied

[2008.06] INNO-BIZ CONFIRMATION

[2008.06] POSCO Pohang No.3 Plate Mill Slab Width & Length Gauge supplied

[2008.06] POSCO Pohang Pohang Electrical Steel Mill 3ACL Pin-hole & Crack Detector
Multi Vision controller with software (PMS-PHD-MVC-288-SW-C) supplied

[2008.05] POSCO Gwangyang 4CGL Williamson Pyrometer supplied

[2008.05] POSCO Pohang No.3 Blast Furnace Williamson Pyrometer supplied

[2008.05] DONGKUK STEEL Pohang No.2 Plate Mill Slab Shape Measurement System
completed

[2008.05] POSCO Mexico CGL Width Gauge 2set supplied

[2008.05] POSCO Pohang Electrical Steel Mill 1HCL Width Gauge supplied

[2008.05] POSCO Pohang Electrical Steel Mill 3HCL Shape Meter contracted

[2008.03] Venture Company Confirmation (Technical Company Confirmation)

[2008.03] DONGKUK STEEL Dangjin Plate Mill Press Leveler Flatness Gauge contracted

[2008.02] POSCO Gwangyang Blast Furnace Williamson Pyrometer 3set supplied

[2008.02] POSCO Gwangyang 1CGL, 4CGL Williamson Pyrometer 2set supplied

[2008.01] POSCO Pohang Electrical Steel Mill 2HCL Pin-hole & Crack Detector Multi
Vision controller with software (PMS-PHD-MVC-288-SW-C) supplied

[2007.12] POSCO Pohang No.2 Plate Mill heating furnace Slab Width & Length Gauge

supplied

[2007.11] POSCO Pohang No.2CRM 3CAL, EGL Pin-Hole Detector 2set supplied

[2007.11] POSCO Mexico Cold Rolled Mill CGL Width Gauge 2set contracted

[2007.11] DONGKUK STEEL Pohang No.2 Plate Mill Slab Shape Measurement System

contracted

[2007.11] DONGKUK STEEL Dangjin Plate Mill Flatness Gauge 2set contracted

[2007.11] HYSCO Dangjin Cold Rolled Mill SPM Calibration Tool supplied

[2007.11] POSCO Vietnam Cold Rolled Mill CAL Width Gauge 2set contracted

[2007.11] POSCO Gwangyang 2CGL Williamson Pyrometer 2set supplied

[2007.10] HYUNDAI STEEL Dangjin B HRM SPM Width Gauge supplied

[2007.10] POSCO Pohang No.2 Plate Mill Heavy Thickness Plate Dimension

measurement System contracted (Width / Length / Camber / Perpendicularity)

[2007.09] DONGKUK STEEL Dangjin Plate Dimension Measurement System 2set

contracted(Width / Length / Camber / Perpendicularity)

[2007.09] POSCO Pohang No.1CRM 2CAL Shape Meter 1set supplied

[2007.09] POSCO Pohang No.2CRM 3CAL Width Gauge supplied

[2007.09] POSCO Pohang No.3 Plate Mill Slab Width & Length Gauge contracted

[2007.08] POSCO Gwangyang No.1CRM 1TCM Width Gauge supplied

[2007.07] HYSCO Suncheon Cold Rolled Mill (CAL, CGL Line) Pin-Hole Detector 2set

supplied

[2007.07] POSCO Pohang No.1 Plate Mill Plate Dimension Measurement System supplied

(Width / Length / Camber / Perpendicularity)

[2007.07] POSCO Magnesium Mill Williamson Pyrometer 2set supplied

[2006.12] POSCO Pohang Williamson Pyrometer Calibration Tool supplied

[2006.12] POSCO Gwangyang Coating Mill 2CGL Williamson Pyrometer supplied

[2006.11] POSCO Pohang No.2 CRM 2PCM Thickness Gauge supplied

[2006.10] POSCO Pohang No.2 HRM RM LINE Hot Metal Detector supplied

[2006.10] POSCO Pohang No.1 CRM 2RCL Width Gauge supplied

[2006.09] POSCO Pohang No.2 Plate Mill Plate Dimension Measurement System

Improvement completed

[2006.09] POSCO Pohang Cold Rolled Mill Pin-Hole Detector Detector Module supplied

[2006.06] POSCO Pohang No.3 Plate Mill Plate Dimension Measurement System supplied

(Width/Length/Camber/Perpendicularity)

[2006.06] POSCO Gwangyang No.2 CRM 2TCM Width Gauge supplied

[2006.06] POSCO Gwangyang new preheating furnace Williamson Pyrometer System

HMI System supplied

[2006.05] POSCO Pohang No.2 HRM 1HSL Width Gauge supplied

[2006.02] POSCO Pohang No.1, 2 HRM SSP LINE HMD supplied

[2005.12] Width Gauge(C-Frame Type) supplied (POSCO Pohang Electrical Steel 3ACL)

[2005.12] Slab Width Gauge (Using Green Laser) supplied (POSCO Pohang No.1 HRM)

[2005.12] Hole & Crack Detector developed & supplied (POSCO Pohang Electrical Steel

2HCL, 3ACL)

[2005.11] POSCO “Plate Mill Dimension Measurement Technology” technical transfer

completed.

[2005.11] Pin-Hole & Crack Detector developed using LED

[2005.05] POSCO Pohang Plate Dimension Measurement System for No. 2 Plate Mill

developed and supplied (Width/Length/Camber/Perpendicularity)

[2005.04] Width gauge related contract (5 lines other than HYSCO & Dangjin-SPM)

[2004.11] Williamson invited for a seminar. POSCO (Pohang, Gwangyang)

[2004.09] Width gauge supplied (HYSCO Suncheon-CGL)

[2004.04] Slab width and length gauge developed and supplied (POSCO-2PM)

[2003.07] Width gauge(C-Frame) developed and supplied (POSCO-1CRM-1CAL-exit

section)

[2003.06] TCM hole and width gauge (top-mount) developed and supplied (POSCO (K)-2

[2001.10] Pyrometer (Sole-Agent of Korea for Williamson Corporation)

[2001.04] Venture enterprises certified (from Small and Medium Business Administration)

[2000.08] LDV developed

[2000.03] Pin-hole detector applying linear CCD camera developed

[2000.02] 3 cases of technological transfer including manufacturing method of steel sheet

surface roughness measuring instruments (POSCO, RIST)

[1999.08] The first year LDV completed

[1998.11] PT111N-144 developed

[1998.07] Laser velocimeter (LDV) R & D started

[1998.05] Surface roughness defect (BUILD-UP) detector developed

[1998.01] Optical research center established

[1997.12] Dew point measuring instrument developed

[1997.09] Measuring devices of sludge concentration in plating solution developed

[1996.07] Incorporated as Palmatech Co.

[1996.02] Alloying degree measuring instrument developed

[1994.06] Company name changed to Palmatech

[1993.12] Surface roughness detector developed

[1992.05] Palma System established